When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
Insize 7260-150, SPRING DIVIDER, 6", 6928640319709
3M 26404, Cloth Belt 341D, 50 X-weight, 2-1/2 in x 60 in, Film-lok, Single-flex, 7010361743, 50 per case
3M 07266, Scotch Strapping Tape 8950-RD-6GC, 1.88 in x 30 yd (48 mm x 27.4 m), 7100269781
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
3M 34786, 663FC, 3/4" X 90", 70u, Diamond Trizact Belts 7100063667
3M 15645, Adhesive Transfer Tape 9472, Clear, 12 in x 180 yd, 5 mil, 7000123326
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
ACS Diamond Cloth Belt, CX1250 3/4" X 18" 250U
3M 73555, Mix & Dispense Equipment Nozzle, TS218, 2 in x 1/8 in, 7100207912
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M 62611, Scotch-Weld Threadlocker TL62, Red, 250 mL Bottle, 7100039195, 2/case 
