3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M 72003, Powerflow High Efficiency SP3 Particulate Filter System Component 450-01-01R20, 7000131701, 20 EA/Case
Dynabrade 51301 .5 hp Straight-Line Die Grinder
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
ACS-CP Curved Edge Flap Disc, 4-1/2" Dia. X 5/8"-11 Center Thread, 60 Grit
Dynabrade 79928 6" Dia. x 220 Grit Vacuum PSA DynaCut Disc, 100/Pack
Standard Abrasives 710335, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 60, 7100080015
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M 14276 Scotch-Brite Surface Conditioning Belt, 1/4 in x 18 in, A MED, 7000120687
Dynabrade 18426 Vane Set (4pk)
Dynabrade 94820 - 3/8" ID, 5' Long Air Hose Assembly, Female/ Male Fitting Ends Included
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Dynabrade 46001 .4 hp Right Angle Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 40320 Dynafile II Abrasive Belt Tool
Dynabrade 48316 .4 hp Right Angle Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
Dynabrade 96043 Motor Tune-Up Kit
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 17183, Scotch-Brite Roloc EXL Unitized Wheel TR, 2 in x NH 2S FIN, 7000045976
Insize PHT-C751-P, PENCIL(17PCS: 6B-9H), 6974029779879
3M 37001, Combination Dual Airline Back-Mounted Breathing Tube SA-2600/37001(AAD), 7000002044, 1 EA/Case
3M 01863, Scotch-Brite Metal Finishing Wheel, MF-WL, 5A Coarse, 6 in x 1 in x 1 in, 7100042616
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 60000 Dynuba 100, 11.25 oz. Aerosol Can
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case 
