3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Insize THT-A103T-U, TEMPERATURE AND HUMIDITY TESTER, 19.69_29.53_23.62", 6974029771484
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 52415 3" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .7 HP, 20,000 RPM, 3/8"-24 Thread
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 16000, PPS Lid & Liner Kit, Standard (22 fl oz), 200 Micron Filter,
50 Lids & Liners per kit, 7010029840
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 54359 .7 hp Right Angle Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 15420 Dynafile III Abrasive Belt Tool
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 01673, Scotch-Brite Light Deburring Wheel, LD-WL, 7S Fine, 12 in x 2 in x 5 in, 7000046055
3M 14276 Scotch-Brite Surface Conditioning Belt, 1/4 in x 18 in, A MED, 7000120687
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
Dynabrade 94853 50' Max Flow 5/16" I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Dynabrade 94858 25' Max Flow 10mm I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included 
