3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Insize HDT-LP200-DC, IMPACT DEVICE DC for HDT-LP200, 6940561948431
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
3M 06839, Booth Coating, 1 Galllon, 7000028421
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 36516, Green Corps Abrasive File Belt, 40 grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100225352, 20 Belts Per Carton, 5 Cartons Per Case
3M 20903, PSA Cloth Disc 348D, P240 X-weight, 2 in x NH, Die 200P, 7000118877
3M 26578, Accuspray ONE Pro Spray Gun Kit for PPS Series 2.0, 7100158715
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 66165, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7100008766, 12/Case
Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
3M 14343, Marine Adhesive Sealant 4000 UV, Black, 600 mL Sausage Pack, 7010309931, 12/Case
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle,Straight, 7000031879
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 35826, Hookit Dust Extraction Flexible Sanding Block, 178 mm x 67 mm, 7100256500
Dynabrade 51863 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
Standard Abrasives 843932, Quick Change Surface Conditioning FE Disc, A/O Medium, TSM, Maroon, 7 in x 5/8"-11, 7010330326, 10/case
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 16831, Urethane Seam Sealer, 08361, Gray, 310 mL Foil Pack, 7000120461, 6 per case
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 27620, Scotch Super 77 Spray Adhesive 7724, 13.57 oz, 7100194459 
