3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
Standard Abrasives 725006, Buff and Blend Cross Buff HP, A/O VFN, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7000046827
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
3M 26139, PPS Series 2.0 Adapter, Type S43, 1/4 Male, 19 Thread BSP, 7100135337
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
Dynabrade 14360 Pneumatic Pipe Belt Finisher
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
ACS Diamond Cloth Belt, CX1250 3" X 30" 60M/250U
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
3M 26312, PPS Series 2.0 Spray Cup System Kit, Midi (13.5 oz, 400 mL),
125 Micron Filter, 7100169346
3M 45120, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/4 in, 7010328349
Insize 7341-10S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .510-.579", 6928640370595
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
Standard Abrasives 863299, Quick Change TR S/C Unitized Wheel, 632, 2 in x 1/4 in, 7010330149
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 26017, PPS Series 2.0 Adapter, Type S10, 1/4 Female, R-Angle 19
Thread BSP for Side Cup Mount, 7100135927
Dynabrade 90123 - 12" x 12" Premium Microfiber Wipe, 10-Pack, Teal
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 07189, Particulate Welding Respirator 8515/07189(AAD), N95, 7000002112, 80 EA/Case
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 84317, Microfinishing Paper Roll 734, 230 mm x 450 m (9 in x 1476 ft x 3 in), 15 Micron, ASO, 7000045790
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case 
