3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M 35828, Hookit Dust Extraction Flexible Sanding Block, 406 mm x 67 mm, 7100256624
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
Dynabrade 78402 2" Dia. x 1/2", Dyna Premium Rapid Strip TR Disc, 25/pack
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
3M 29829, Sanding Screen, 80 Grit, 19 in x NH, 7100160252
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 13171, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 1 in x 1 in, 7000136469
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
3M 26105, PPS Series 2.0 Adapter, Type S21, 14 mm Female, 1.0 mm
Thread, 7100135829
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
3M 22971, Disc Holder Adapter 9, 5/8-11 External M10-1.25 Internal, 7000046094
3M 84177, Microfinishing PSA Film Disc Roll 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7000118206, 125 discs per roll
3M 16314, PPS Lid & Liner Kit, Mini (6 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045487
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 35826, Hookit Dust Extraction Flexible Sanding Block, 178 mm x 67 mm, 7100256500
3M 25496, Scotch-Weld Epoxy Adhesive 2214 Non-Metallic Filled, Cream, 6 fl oz Cartridge, 7000121273, 4/case 
