3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 39057, Scotch Duct Tape 910-MMD-C, 1.88 in x 10 yd (48 mm x 9,14 m), 7100183288
Dynabrade 91069 1" Dia. x 1" W, 80 Grit, Z/A DynaCut Band, 10/pack
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Standard Abrasives 710335, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 60, 7100080015
3M 16585, Accuspray Atomizing Head, Clear, 1.8 mm, 7100078990
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 14345, Marine Adhesive Sealant 4000 UV, Black, 3 oz Tube, 7010367954, 6/Case 
