3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Standard Abrasives 701656, Cartridge RoII Mandrel, 3/16 in x 2 in x 1/4 in x 1-1/4 in x 4 in CM-18, 7010368730
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
Dynabrade 95544 Gear Grease, 2.5oz. Tube
3M 29822, Sanding Screen, 120 Grit, 20 in x NH, 7100160250
3M 29829, Sanding Screen, 80 Grit, 19 in x NH, 7100160252
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
Dynabrade 40320 Dynafile II Abrasive Belt Tool
3M 29850, Sanding Screen, 120 Grit, 15 in x NH, 7100160830
3M 64935, Scotch-Brite Hand Pad 7448 PRO, PO-HP, SiC Ultra Fine, 6 in x 9 in, 7100023340, 20/Carton
3M 49711, Particulate Respirator 8210V, N95, 7000002462, 80 EA/Case
3M 29824, Sanding Screen, 80 Grit, 20 in x NH, 7100160247
3M 19081, E-A-R EXPRESS Pod Plugs Probed Test Plugs 393-2008-50, 50 PR/Case, 7000052879
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case 
