3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic. Our two-part, black epoxy adhesive is rated for bonding both movable and stationary glass into place. This rapidly curing adhesive has a work time of 5 minutes, a clamp time of 1 hour and a cure time of 24 hours under typical environmental conditions. The quick-curing properties of this adhesive is a benefit compared to the hours or even days it often takes for one-part sealers and adhesives. The black color of the adhesive maintains the desired O.E.M. appearance.
Apply this adhesive with a 3M™ Performance Manual Applicator (part number 08190) and 3M™ Static Mixing Nozzle (part number 38191). This comprehensive mixing and application system provides precise placement of adhesive with no waste and more time savings.
PRECAUTIONARY INFORMATION:
Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC’s) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area.
Typical Performance Properties:
The following times have been determined with ambient air temperature and substrate temperature @ 70°F (21°C) and are considered typical values.
- WORK TIME: 5 minutes
- MIX NOZZLE DWELL TIME: 3.5 minutes
- HANDLING/CLAMP TIME: 1 hour
- CURE TIME: 24 hours
Directions for Use:
Preparation: Clean the side glass channel of dirt, oil, grease and moisture dry thoroughly. When bonding to a metal channel, first remove all rust. For optimum adhesion and corrosion resistance, prime all metal surfaces prior to applying seam sealer(s). If an acid-etch (self-etching) primer is used, a 2K epoxy or urethane primer must be applied before the application of the adhesive.
Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product.
- Clean the window glass of all dirt, oil grease and moisture using glass cleaner. Dry thoroughly.
- If repairing a movable glass position the glass properly in the glass run channel and tape in place in the up position. If stationary glass prepare the pinch weld area as necessary, (be sure to pre-fit all parts prior to applying the adhesive).
- Insert the cartridge into the applicator gun, remove the cap from the cartridge and dispense a small amount of adhesive until both parts A and B dispense equally.
- Attach the mixing nozzle and dispense a small amount of adhesive through the mixing nozzle.
- Apply the adhesive to one of the parts and assemble the parts within 3 minutes.
- If bonding a movable glass leave the glass in the up position for 24 hours before using. If bonding a stationary glass fixture in place for 1 hour before using.
CLEAN_UP:
Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product.

3M 28817, STIKIT LOW PROFILE DISC PAD, EXTRA FIRM, 5 IN X 3/8 IN X 5/16 IN, 24 EXTERNAL, 7010361145
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 02405, Utility Cloth Sheet 211K, 9 in x 11 in 220 J-weight, 7010299775
Dynabrade 95848 Dynabrade Gear Oil
Dynabrade 40320 Dynafile II Abrasive Belt Tool
3M 85391, Cloth Belt 963G, 50 YN-weight, 2 in x 72 in, Film-lok, L-flex, 7010299930, 50 per case
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
3M 62817, Adhesive Sealant 760 UV, Black, 290 mL Cartridge, 7100139449, 12/Case
Dynabrade 53242 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 6,000 RPM, 5/8"-11 Spindle
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
3M 08368, Urethane Seam Sealer, White, 310mL Cartridge, 7100049325, 12 per case
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
3M 72000, Breathe Easy High Efficiency P3 Particulate Cartridge 450-00-01R12, 7000131700, 12 EA/Case
3M 16578, Accuspray ONE Spray Gun Kit, 7100096182
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
3M 33066, Cloth Belt 341D, P100 X-weight, 25 in x 48 in, Sine-lok, Single-flex, 7010308084, 5 per case
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
3M 82460, Stikit Gold Film Disc Roll 255L, P500, 5 in x NH, Die 500X, 7010308367, 125 discs per roll 
