-
×
3M Cubitron 3 Cut-Off Wheel, 90031, 60+, T1, 3 in x 0.035 in x 3/8 in (75 x 0.9 x 9.53 mm), ANSI, 50 ea/Case, 7100303859
50 × $5.47 -
×
3M 91010, E-A-R, Soft SuperFit One Touch Refill 391-1254, Regular Size, 2000 EA/Case, 7000042881
1 × $371.18
-
×
Dynabrade 07107 Vane Set (5pk)
1 × $33.82 -
×
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
1 × $47.74 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Insize 2307-1R, REVERSE READING DIAL INDICATOR, 1", lug back, 6928640396649
2 × $45.31
-
×
Dynabrade 56874 3-1/2" Dia. Central Vacuum Dynorbital Supreme Random Orbital Sander, 3/8" Orbit
1 × $284.00 -
×
Dynabrade 96232 Arbor Press
1 × $1,058.48 -
×
Dynabrade 11518 Rubber Drive Wheel
1 × $123.26 -
×
Standard Abrasives 710479, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 80, 7100085870
100 × $0.63 -
×
Dynabrade 81004 2" W x 42" L 60 Grit A/O DynaCut Belt, 10/pack
10 × $5.21 -
×
Dynabrade 53474 Direct Drive Reversible Screwdriver, .5 HP, 950 RPM, 1/4" Hex Drive
1 × $1,119.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
1 × $140.64 -
×
Dynabrade 52169 Handle Assembly
1 × $51.26 -
×
Dynabrade 52474 Vane Set (4pk)
1 × $34.27 -
×
3M 55563, Performance Flatback Tape 2525, Orange, 48 mm x 55 m, 9.5 mil, 24Rolls/Case, 7000088508
24 × $34.66
-
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20
3M 08186, Replacement Applicator Plunger, 7010300589
This item has been Discontinued.
3M Replacement Applicator Plunger meets 3M standards as a replacement part for our applicator gun. Our 3M-approved replacement plunger will maintain optimal performance standards in our applicator guns.
3M™ Replacement Applicator Plunger is an approved replacement part for our applicator guns. When used as a replacement part, this plunger delivers the same high performance as the original component.
Replacement applicator plungers are available for the following products:
3M™ Applicator Gun (part number 08117) designed for use with 3M™ 200 mL adhesives, and sealers cartridges. Applicator has a 1:1/2:1 mixing ratio.
3M™ Performance Manual Applicator Gun (part number 08190) designed for use with 3M 50mL and 2:1 37.5mL cartridges. Applicator has a 1:1 mixing ratio.
Related products
Adhesives & Sealants
3M 87981, Scotch-Weld EPX 2:1 Plunger for EPX 200 mL Manual Applicator, 7000121583
Overspray Protectors
3M Dirt Trap Protection Material Applicator, 36865, Floor Model, 1 per case
$297.13
Adhesives & Sealants
$2.38