-
×
3M 93640, PELTOR Welding Earmuff H505B, Behind-the-Head, 10 EA/Case, 7000103840
1 × $390.83 -
×
Dynabrade 11518 Rubber Drive Wheel
1 × $123.26 -
×
3M 29823, Sanding Screen, 100 Grit, 20 in x NH, 7100160246
12 × $9.25 -
×
Dynabrade 11004 Dynafile Screw-In Housing
1 × $275.11 -
×
Standard Abrasives 707947, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 40, 7100085874
100 × $0.64 -
×
Dynabrade 96241 Bearing Press Tool
1 × $65.04 -
×
Insize 2307-1R, REVERSE READING DIAL INDICATOR, 1", lug back, 6928640396649
1 × $45.31
-
×
Insize PHT-C751, PENCIL HARDNESS TESTER, 6974029779862
1 × $709.63
-
×
Dynabrade 52474 Vane Set (4pk)
2 × $34.27 -
×
Insize 1138-200, DIGITAL CALIPER WITH LONG UPPER JAWS, 0-8"/0-200mm, 6928640392344
1 × $461.72
-
×
3M 97008, Cartridge Roll 341D, P180 X-weight, 3/8 in x 1 in x 1/8 in, 7100086098
100 × $0.54 -
×
Insize MLP-MP43-U, MOUNTING PRESSES (ADVANCED TYPE), 6940561981735
1 × $17,860.50
-
×
Dynabrade 53477 Direct Drive Reversible Screwdriver, .5 HP, 3,700 RPM, 1/4" Hex Drive
1 × $818.00 -
×
3M Cubitron 3 Cut and Grind Wheel, 89158, 36+, T27, 4-1/2 in x 1/8 in x 5/8 in-11 (115 x 3.2 mm x 5/8-11 in), ANSI, 10 ea/Case, 7100313760
10 × $13.72
-
×
Dynabrade 93597 3/4" Dia. x 3/8", 3-48 Female Center Thread, 60 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
1 × $128.00 -
×
Dynabrade 79379 6" Dia. x 180 Grit A/O Hook Multi-Hole Vacuum Film-Backed DynaCut Disc, 100/Box
100 × $1.57 -
×
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
1 × $140.64 -
×
Dynabrade 55242 Vane Set (4pk)
1 × $38.19 -
×
3M 97042, Cartridge Roll 341D, 80 X-weight, 1/2 in x 1 in x 1/8 in, 7100086101
100 × $0.61
3M 08186, Replacement Applicator Plunger, 7010300589
This item has been Discontinued.
3M Replacement Applicator Plunger meets 3M standards as a replacement part for our applicator gun. Our 3M-approved replacement plunger will maintain optimal performance standards in our applicator guns.
3M™ Replacement Applicator Plunger is an approved replacement part for our applicator guns. When used as a replacement part, this plunger delivers the same high performance as the original component.
Replacement applicator plungers are available for the following products:
3M™ Applicator Gun (part number 08117) designed for use with 3M™ 200 mL adhesives, and sealers cartridges. Applicator has a 1:1/2:1 mixing ratio.
3M™ Performance Manual Applicator Gun (part number 08190) designed for use with 3M 50mL and 2:1 37.5mL cartridges. Applicator has a 1:1 mixing ratio.
Related products
Adhesives & Sealants
3M 27571, Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc, 7000002020
$2.10
Overspray Protectors
3M Dirt Trap Protection Material Applicator, 36865, Floor Model, 1 per case
$297.13
Adhesives & Sealants
3M 86391, Scotch-Weld EPX 10:1 Plunger for EPX Plus II Applicator, 45 mL, 7010329933
$13.58