-
×
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
200 × $1.61 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60 -
×
3M 16611, Accuspray Atomizing Head, Clear, 1.8 mm, 7000000500 (4 Nozzles/Kit)
6 × $29.64 -
×
Dynabrade 78423 4-1/2" Dia. x 3/8" Very Fine DynaBrite Surface Conditioning Disc, 25/pack
25 × $5.21 -
×
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
200 × $1.92 -
×
3M 20932, PSA Cloth Disc 348D, 80 X-weight, 1 in x NH, Die 100N, 7000118914
500 × $0.40 -
×
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
1 × $72.49 -
×
3M 29842, Sanding Screen, 180 Grit, 16 in x NH, 7100160822
12 × $4.58 -
×
3M 36876, Self-Stick Liquid Protection Fabric, Blue, 4 in x 300 ft perroll, 7100169348, 6 Rolls Per Pack
1 × $534.33 -
×
3M 05228 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 3-1/2 in x 15-1/2 in, 7000028435
10 × $27.92 -
×
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
200 × $3.47 -
×
3M 36880, Self-Stick Liquid Protection Fabric, Blue, 36 in x 300 ft, 7100169352
1 × $901.76 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 26325, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850
mL), 125 Micron Filter, 7100134637
1 × $151.19 -
×
Insize 7113-300A, RIGID RULE, 12"/300mm, 6928640319860
1 × $24.61 -
×
3M 07501, Scotch-Brite Molding Adhesive and Stripe Removal Disc, 07501, 4 in x 3/8 in, 7000028458
5 × $24.33 -
×
3M 64421, Two-Component Adhesive Sealant Applicator 400A-2K, 7100010298
1 × $1,011.56
3M 08186, Replacement Applicator Plunger, 7010300589
$7.43
Factory Stock, 7-10 Day Leadtime
3M Replacement Applicator Plunger meets 3M standards as a replacement part for our applicator gun. Our 3M-approved replacement plunger will maintain optimal performance standards in our applicator guns.
3M™ Replacement Applicator Plunger is an approved replacement part for our applicator guns. When used as a replacement part, this plunger delivers the same high performance as the original component.
Replacement applicator plungers are available for the following products:
3M™ Applicator Gun (part number 08117) designed for use with 3M™ 200 mL adhesives, and sealers cartridges. Applicator has a 1:1/2:1 mixing ratio.
3M™ Performance Manual Applicator Gun (part number 08190) designed for use with 3M 50mL and 2:1 37.5mL cartridges. Applicator has a 1:1 mixing ratio.
Related products
Adhesives & Sealants
3M 27571, Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc, 7000002020
$1.98
Overspray Protectors
3M Dirt Trap Protection Material Applicator, 36865, Floor Model, 1 per case
$297.13
Adhesives & Sealants
$2.25
Adhesives & Sealants
3M 40118, High Strength Small Hole Repair, All-in-One Applicator Tool, SHR-3-AIO, 7100203787
$5.95
