-
×
Dynabrade 57737 Overskirt Shroud for Orbital Sander
1 × $39.90 -
×
Dynabrade 53808 .5 hp Straight-Line Die Grinder, Steel Housing, Rear Exhaust, 24,000 RPM, 1/4" Collet
1 × $542.00 -
×
Dynabrade 51933 Governor Assy
1 × $95.48 -
×
Dynabrade 53080 1/2" Right Angle Drill, .7 HP, Rear Exhaust, 3,400 RPM
1 × $1,008.00 -
×
3M 31899, Scotch Commercial Grade Shipping Packaging Tape 3750-4RD-6GC, 1.88 in x 54.6 yd (48 mm x 50 m) 4 Pack, Clear, 7100253494
6 × $24.31
-
×
Dynabrade 55214 Governor Weight, 7,200 RPM
1 × $65.99
-
×
Dynabrade 31968 Conductive Y Adapter
1 × $49.41 -
×
Dynabrade 01011 Vane Set (4pk)
1 × $27.37 -
×
Dynabrade 51078 Bearing
1 × $29.53 -
×
Dynabrade 11216 Contact Arm Ass'y, 5/8" Dia. x 1/8" W, Rubber Wheel, with 1/4" W Platen
1 × $73.03 -
×
Dynabrade 48350 .4 hp Straight-Line Die Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $423.00 -
×
Dynabrade 50607 5" Dia. Vacuum Disc Pad, Hook-Face, Long Nap
1 × $34.46 -
×
Dynabrade 13430 Housing for Model 13400; 3,400 RPM
1 × $513.00
-
×
Dynabrade 95675 1/4" Male Plug with 1/4" NPT Male Thread
1 × $4.74 -
×
Dynabrade 79688 8" 150 Grit, Extreme Orange Hook & Loop Disc w/8 Vac Holes, 25 per Box
1 × $51.14 -
×
Dynabrade 91426 1/4" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 78694 D22 Cartridge Roll Mandrel 1/4" Pilot Dia. x 1-1/2" Pilot Length, 1/4" Dia. Shank x 1-1/4" Shank Length
1 × $5.21 -
×
Dynabrade 21752 Valve Block for 900, 9,000 RPM SandPolish
1 × $86.81
-
×
Dynabrade Dynacut 94021, 10-piece, Alloy Specific Burr Kit (for Nickel & Titanium), 1/8" Shank
1 × $173.12 -
×
Dynabrade 79010 1/2" W x 12" L 40 Grit A/Z DynaCut Belt, 50/pack
50 × $2.05
Dynabrade 78769 3″ Dia. x 2″ W x 1/4″ Shank, Fine, NWN DynaBrite Wheel, 10/pack
$16.77
3″ Dia. x 2″ W x 1/4″ Shank, Fine, NWN DynaBrite Wheel, 12,000 RPM Max, 10/pack
Abrasive Specifications
Mfr. Part # 78769
| Abrasive Category | Non Woven Abrasives |
|---|---|
| Abrasive Diameter [inches] | 3″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Wheels |
| Diameter [inches] | 3″ |
| Abrasive Sub Shape | Flap Wheel |
| Abrasive Width [inches] | 2″ |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 2.0 |
| Abrasive Backing Material | Woven Cloth |
| Abrasive Sub Shape 2 | 1/4″ Shank |
| Abrasive Tier | Good |
| Case Qty | 1.0 |
| EAN (UPC) Code | 0616026783157 |
| GL_Minimum Order Quantity | 1.0 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | Fine |
| Type | Non-Woven Nylon |
Related products
