-
×
3M 14111, Cushion-Mount Pro Plate Mounting Tape with Comply Adhesive System 21320, Yellow, 18 in x 25 yd, 20 mil, 7100160399
2 × $737.91 -
×
Dynabrade 79173 2" W x 30" L 60 Grit Ceramic DynaCut Belt, 10/pack
20 × $15.91 -
×
Standard Abrasives 875014, Buff and Blend Flap Brush, Hard Density A/O Very Fine, 12 in x 2 in x 5 in, 180 Flaps, 7010367156
2 × $191.10 -
×
Dynabrade 95600 Tune-Up Kit for .5 hp Motor
5 × $130.26 -
×
Dynabrade 79174 2" W x 30" L 80 Grit Ceramic DynaCut Belt, 10/pack
40 × $15.91
-
×
3M 55959, Green Corps Depressed Center Grinding Wheel, T27, 7 in x 1/4 in x 5/8-11 Internal, 36, 7100123075, 10 per case
10 × $12.28 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 18451, Scotch-Brite Heavy Duty Hand Pad 7440B, HP-HP, A/O Medium, 6 in x 9 in, 7000000715, 40 ea/Case
1 × $139.68
3M 92766, Final Stripping Pads 10113NA, 0 Fine, Two-pack, Open Stock , 3-3/4 in. x 6 in. x 5/16 in., 7000122787
$1.74
Factory Stock, 7-10 Day Leadtime
3M Between Coats Finishing Pads are used to prepare surfaces before applying the first coat of finish or sealer and again between coats to obtain a super-smooth finish.
3M Final Stripping Pads replace “0” steel wool. Thoroughly clean surfaces of all remaining residue to keep blemishes from occurring when stains or finishes are applied. 3M Final Stripping Pads will not harm wood surfaces. Use these pads to thoroughly clean surfaces of all remaining residue prior to applying stain or finish. If surfaces are not completely cleaned, blemishes may occur when stains or finishes are applied.
Related products
Non-Woven Hand Pads
3M 10112, Heavy Duty Stripping Pads, 3 3/4 in x 6 in x 7/16 in, 7010290303
$1.74
Non-Woven Hand Pads
3M 04028, Scotch-Brite Hand Pad 7448, HP-HP, SiC Ultra Fine, Gray, 6 in x 9 in, 7100089226, 60/case
$85.47
Non-Woven Hand Pads
$139.68
Non-Woven Hand Pads
3M 65056, Scotch-Brite Blending Hand Pad 7446, HP-HP, SiC Medium, 6 in x 9 in, 7100082599, 40/Case
$103.26