Safe to use on aircraft surfaces, gel coated fiberglass, acrylics, and polycarbonate, the pad does not alter or scratch the gloss level of surface or coatings.
Our Scotch-Brite Aircraft Cleaning Pad has been tested with aircraft cleaning agents complaint with MIL-PRF-86937D and MIL-PRF885570C and is also usable with a variety of other cleaners. The pad works in conjunction with pressure wash systems and attaches easily to 3M pad holders and extension rods.
Scotch-Brite Aircraft Cleaning Pad is a unique cleaning product where the polymer coating is incorporated into non-woven synthetic fibers. Combining the non-abrasive coating into the fibers creates a cleaning tool that delivers consistent results over its lifetime.
Our Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Standard Abrasives 708756, A/O Tapered Cone Point, K-110 120, 7100139933, 100 per case
Insize 1120-2001, DIGITAL INSIDE GROOVE CALIPER, 1.57-8"/40-200mm, 6928640384813
3M 03126, General Purpose Sanding Sponge CP040-6P, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100101532, 6/pack
Dynabrade 40320 Dynafile II Abrasive Belt Tool
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
3M 65086, Scotch-Brite Diamond Wheel, 6" x 1" x 1" 645DC, 7010329878
3M 36516, Green Corps Abrasive File Belt, 40 grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100225352, 20 Belts Per Carton, 5 Cartons Per Case
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
3M 76625, Roloc Disc 777F, 80 YF-weight, TR, 1 in, Die R100N, 7000045621
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 19871, Neoprene High Performance Rubber and Gasket Adhesive 1300, Yellow, 1 Quart Can, 7100025171, 12/case
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
Dynabrade 51863 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
3M 92768, Heavy Duty Stripping Tool 10110NA-PT, 3 Coarse, One, Open Stock, 3.375 in. x 5 in. Handle and Pad, 7010292604
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
Dynabrade 79447 6" x 9" DynaBrite General Purpose Maroon Hand Pad, 60/Box 
