-
×
3M 31381, Cubitron II Hookit Marine Sanding Abrasive Disc 737U, 31381, 6 in, 120+, 7100062433
80 × $19.02 -
×
3M 34565, Cubitron II Net Sheet Roll, 220+, 70 mm x 10 m, 7100247497, 6 Rolls/Case
12 × $27.69 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 120" 125U
16 × $27.50 -
×
3M 88906, PSA Cloth Disc 348D, 36 X-weight, 12 in x NH, Die 1200B, 7000118898
10 × $8.91 -
×
3M 28324, Clean Sanding Interface Pad, 3 in x 4 in x 1/2 in 33 Holes, 7100138159
10 × $14.83 -
×
Standard Abrasives 827620, Buff and Blend HP Power Pad, 6 in x 9 in, A VFN, 7010310293, 50 ea/Case
1 × $190.45 -
×
3M 04229, Scotch-Brite Hand Pad 7447B, HP-HP, A/O Very Fine, 6 in x 9 in, 7000027560, 60 ea/Case
1 × $77.93 -
×
3M 04029, Scotch-Brite Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 7000000728, 60/Case
2 × $82.43 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 98534, Premium Matte Cloth (Gaffers) Tape GT3, Black, 72 mm x 50 m, 11 mil, 7010291525
32 × $90.13 -
×
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
6 × $25.65
-
×
Dynabrade 91163 3/8" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.60
-
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
30 × $26.95 -
×
Dynabrade 91167 1/2" W x 13" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.81
-
×
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60
-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 10112, Heavy Duty Stripping Pads, 3 3/4 in x 6 in x 7/16 in, 7010290303
12 × $1.74
3M 07415, Hand Sanding Wood Finishing Pad 7415NA, 4.375 in x 11 in, Gray Fine, 7010383728
$1.77
Factory Stock, 7-10 Day Leadtime
3M Between Coats Finishing Pads are used to prepare surfaces before applying the first coat of finish or sealer and again between coats to obtain a super-smooth finish.
3M Hand Sanding Wood Finishing Pad smoothes bare woods between coats of stain, sealer or varnish and rubs in furniture oils. It wont splinter rust or shred like steel wool. Recommended for use with water based stains and finishes.
Related products
Non-Woven Hand Pads
Dynabrade 79447 6″ x 9″ DynaBrite General Purpose Maroon Hand Pad, 60/Box
$77.41
Non-Woven Hand Pads
3M 50199, Finesse-it Hand Sanding Pad, 1-1/4 in, Soft Black Vinyl Face, 7000028401
$10.24
Non-Woven Hand Pads
3M 04229, Scotch-Brite Hand Pad 7447B, HP-HP, A/O Very Fine, 6 in x 9 in, 7000027560, 60 ea/Case
$77.93
Non-Woven Hand Pads
Standard Abrasives 827600, Buff and Blend GP Power Pad, 6 in x 9 in, A VFN, 7010330610, 50 ea/Case
$99.05
