-
×
3M 81109, Microfinishing PSA Film Disc Roll 268L, 3 in x 7/8 in x 250, 30 Micron, Type D, Die 300M, 7100070631
4 × $111.23 -
×
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
48 × $168.76 -
×
Air Turbine Tools 2545SVR - 1/4" Angle Hand Tool Series (Long Version, Rear Exhaust), 30,000RPM, 35530
1 × $585.00 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
10 × $4.32 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 36882, Self-Stick Liquid Protection Fabric, Blue, 56 in x 300 ft, 7100169350
1 × $1,246.87 -
×
3M 54370, Particulate Respirator 8576, P95, with Nuisance Level, Acid Gas Relief, 7000002061, 80 EA/Case
1 × $417.29 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3 × $80.58 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
ACS Diamond Cloth Belt, CX1250 3/4" X 18" 250U
8 × $8.80 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 85393, Cloth Belt 777F, P120 YF-weight, 2 in x 48 in, Film-lok, L-flex, 7000118464, 50 per case
50 × $9.83 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 04028, Scotch-Brite Hand Pad 7448, HP-HP, SiC Ultra Fine, Gray, 6 in x 9 in, 7100089226, 60/case
1 × $85.47
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
$1.77
Factory Stock, 7-10 Day Leadtime
3M Between Coats Finishing Pads are used to prepare surfaces before applying the first coat of finish or sealer and again between coats to obtain a super-smooth finish.
3M Hand Sanding Metal Sanding Pad 7414, 4.375 in x 11 in, Maroon Medium. Removes light rust from metal. Wont rust, splinter or shred like steel wool.
Related products
Non-Woven Hand Pads
3M 65055, Scotch-Brite Heavy Duty Hand Pad 7440, HP-HP, A/O Medium, 6 in x 9 in, 7100080459, 40/Case
$153.38
Non-Woven Hand Pads
3M 16553, Scotch-Brite Extra Duty Hand Pad 6444, 6 in x 9 in, 7000028548, 60/Case
$100.58
Non-Woven Hand Pads
Dynabrade 79448 6″ x 9″ DynaBrite General Purpose Maroon Hand Pad, 20/box
$28.56
Non-Woven Hand Pads
3M 50199, Finesse-it Hand Sanding Pad, 1-1/4 in, Soft Black Vinyl Face, 7000028401
$10.24