The performance of Scotch-Brite General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite pads wont shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9″ pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas.
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
Dynabrade 78294 3" Dia. x 2A M Medium Type R Unitized Locking-Type Disc, 25/pack
3M 35833, Hookit Dust Extraction Flexible Radius Sanding Block Kit, 7100259118
3M 26618, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Clear, 1.8 mm, 7100141416 (4 Nozzles/Kit)
Dynabrade 22093 4-1/2" x 9" Hand Sanding Block
3M 37853, Dirt Trap Protection Material, Gray, 56 in x 300 ft, 7100132344
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 35829, Hookit Dust Extraction Flexible Sanding Block Kit, 7100259119
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
Insize ISP-A3000E, HORIZONTAL PROFILE PROJECTOR, 12" DIA, with edge detector, 6928640339523
3M 06520, Marine Adhesive Sealant 5200FC Fast Cure, White, 295 mL Cartridge, 7000000629, 12/Case
3M 62817, Adhesive Sealant 760 UV, Black, 290 mL Cartridge, 7100139449, 12/Case
3M 13172, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 1 in x 1 in, 7000136471
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 20244, Neoprene Rubber and Gasket Adhesive 2141, Light Yellow, 1 Gallon Can, 7000121215, 4/case
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 20851, Scotch-Weld Epoxy Adhesive 2216, Translucent, Part B/A, 2 fl oz Kit, 7000046479, 6/case
3M 16609, Accuspray Atomizing Head, Red, 2.0 mm, 7000045543 (4 Nozzles/Kit) (6 Kits/Case)
3M 20152, Scotch-Weld Epoxy Adhesive 1838, Green, Part B/A , 1 Quart Kit, 7000046340, 6/case
Dynabrade 78425 4-1/2" Dia. x 3/8" Coarse DynaBrite Surface Conditioning Disc, 25/pack
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 09499, Marine Adhesive Sealant 5200, 06500, White, 295 mL Cartridge, 7000000623, 12/Case
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M 30026, Hi-Tack Spray Adhesive 76, Clear, 24 fl oz Can (Net Wt 18.1 oz), 7000046589, 12/Case
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
Dynabrade 91427 1/4" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack 
