-
×
Dynabrade 90400 1/2" W x 24" L Very Fine NWN DynaBrite Premium Belts, 10/pack
10 × $8.51 -
×
Dynabrade 79877 3" 1200 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $33.02 -
×
Dynabrade 57583 5" Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, 3/32" Orbit
1 × $487.90 -
×
Dynabrade 91547 5" Dynacut Extreme Orange Premium Film Disc, 120 Grit, Hook & Loop, Non-Vacuum, 50/Box
1 × $35.82 -
×
Dynabrade 82566 3/4" W x 18" L 120 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.81 -
×
Dynabrade 18601 Handle Grip
1 × $33.78 -
×
Dynabrade 52675 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 9,000 RPM, 1/4" Collet
1 × $728.59 -
×
Dynabrade 56859 6" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/32" Orbit
1 × $255.77 -
×
Dynabrade 50107 2" Dia. Disc Backup Pad, 1/4"-20 Thread, PSA
1 × $23.40 -
×
Dynabrade 54369 .7 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
1 × $975.24 -
×
Dynabrade 90996 Tungsten Carbide Insert, 1/8" Scribe
1 × $59.51 -
×
Dynabrade 58912 5" Dia. Compact Rebel Right Angle Disc Sander
1 × $1,180.78 -
×
Dynabrade 93658 3" Dia. x 3/8" CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
1 × $117.02 -
×
Dynabrade 84855 3" x 4" Super Fine Foam, Extreme Orange, 24 per pack
24 × $1.20 -
×
Dynabrade 02501 Drop-In Motor
1 × $394.84 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86
Standard Abrasives 522520, Quick Change Silicon Carbide 2 Ply Disc, 120, TSM, Black, 3 in, Die QS300VM, 7010368190, 50/case
$0.88
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
