-
×
3M 64324, Foil Tape 3340, Silver, 72 mm x 45.7 m, 3.9 mil, 7010335734
16 × $33.04 -
×
3M 65056, Scotch-Brite Blending Hand Pad 7446, HP-HP, SiC Medium, 6 in x 9 in, 7100082599, 40/Case
2 × $103.26 -
×
Insize 6301, MICROMETER STAND, 6928640307300
2 × $38.90 -
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
-
×
3M 11000, Roloc Disc 361F, 24 YF-weight, TR, 2 in, Die R200P, 7000028183
200 × $1.25 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $1,925.99 -
×
Standard Abrasives 712149, Aluminum Oxide Handy Roll, P100 J-weight, 1-1/2 in x 50 yd, 7010295370
1 × $37.54 -
×
3M 69622, Hookit Gold Film Disc 255L, P320, 3 in x NH, Die 300V, 7010299035, 50 discs per carton
4 × $22.73
-
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
1 × $24.78
-
×
Dynabrade 82555 1/2" W x 18" L 60 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.66 -
×
3M 64659, Scotch-Brite Durable Flex Hand Pad, MX-HP, A/O Very Fine, 4-1/2 in x 9 in, 7100042334, 25/Carton
4 × $27.08 -
×
3M 69619, Hookit Gold Film Disc 255L, P180, 3 in x NH, 7010308369, 50 discs per box
4 × $22.73
-
×
3M 16121, PPS Type H/O Pressure Cup, Mini, 7000119727
4 × $52.00
Standard Abrasives 522318, Quick Change Silicon Carbide 2 Ply Disc, 80, TSM, 1-1/2 in, 7010330965, 50 per case
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
