-
×
Dynabrade 11462 Dynabelter Finisher
1 × $2,092.17 -
×
3M 06512, Scotch Steel Gray Masking Paper, 06512, 12 in x 1000 ft, 3 per case, 7010327747
3 × $88.10 -
×
3M 08368, Urethane Seam Sealer, White, 310mL Cartridge, 7100049325, 12 per case
12 × $26.40 -
×
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
18 × $2.69 -
×
3M 10119, Synthetic Steel Wool Pad 10119NA, 0000 Super Fine, 7000126181
18 × $2.69 -
×
3M 28848, Unitized Wheel Mandrel 28848, 1-5/8 in x 1/4 in x 3/4 in x 1/4 in, 7100082547
5 × $18.31 -
×
Insize 4809, U.S. STAND SHEET METAL GAGE, 0-36(.3125~.0070"), 6928640330162
1 × $35.18
-
×
Dynabrade 51862 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
1 × $680.48 -
×
Dynabrade 51333 .7 hp Router, 4" Base, Central Vacuum, 20,000 RPM, 1/4 Collet
1 × $982.24 -
×
3M 00705, Interam Stainless Steel Foil Tape T-65, 4 in x 100 ft, 7100024280
72 × $192.19 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
1 × $29.99 -
×
3M 45019, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 36 in x 50 yd, 1 Roll/Case, 7100282389
1 × $2,446.58
-
×
3M 14895, Cloth Belt 777F, 80 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010299926, 200 per case
200 × $4.46 -
×
3M 10120, Synthetic Steel Wool Pads, 10120NA, #000 Extra Fine, 7000126149
18 × $2.69 -
×
3M 96125, Woven Patch Tape 442B, Black, 99 mm x 50 m, 15 rolls per case, 7100043941
15 × $21.29
-
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
