-
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
3M 26104, PPS Series 2.0 Adapter, Type S20, 1/8 Male, 27 Thread NPSM, 7100135929
1 × $25.96 -
×
3M 82238, Scotch-Weld Epoxy Adhesive 420, Off-White, Part B, 5 Gallon Drum(Pail), 7100001145
5 × $327.91 -
×
3M 20909, PSA Cloth Disc 348D, 80 X-weight, 2 in x NH, Die 200P, 7000118873
200 × $0.78 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 14643, Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS, Gray, 490 mLDuo-Pak, 7100179480, 6/case
6 × $91.29 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40 -
×
3M 01551, Green Corps Stikit Production Disc, 8 in, 36, 7000148230, 50 discs per carton
5 × $214.73 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 08301, Ultrapro Autobody Sealant, 08301, Tan, 5 oz Tube, 7100142901, 6 per case
6 × $25.60 -
×
3M 06564, Marine Adhesive Sealant 4200FC Fast Cure, Black, 295 mL Cartridge, 7000120497, 12/Case
12 × $25.30 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
