-
×
3M 69679, Trizact Cloth Belt 237AA, A30 X-weight, 3-1/2 in x 15-1/2 in, Film-lok, Full-flex, 7000028338, 50 per case
50 × $11.59 -
×
3M 62615, Scotch-Weld Threadlocker TL90, Green, 10 mL Bottle, 7100039234, 10/case
10 × $13.32 -
×
Standard Abrasives 727399, Buff and Blend Cross Buff HS, A/O Medium, 2 in x 3/4 in x 2 Ply x 1/4-20, 7000047137
25 × $7.02 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series, 40,000RPM, 33440
1 × $950.00 -
×
3M 30189, Trizact Hookit Foam Sheets, 5000, 2-3/4 in x 5-1/2 in (70 mm x 140 mm), 7000120137, 5 sheets per carton
10 × $19.46 -
×
3M 62610, Scotch-Weld Threadlocker TL62, Red, 50 mL Bottle, 7100039196, 10/case
10 × $36.70 -
×
Standard Abrasives 725007, Buff and Blend Cross Buff HS, A/O Medium, 1 in x 3/8 in x 2 Ply x 8-32, 7000046828
50 × $3.13 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Standard Abrasives 78511, Ceramic Pro Type 27 Flap Disc, 645104, 4-1/2 in x 5/8-11 80 Y-weight, 7010331461
10 × $9.26 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $746.76 -
×
Dynabrade 51330 .7 hp Router, Front Exhaust, 20,000 RPM, 3/8"-24 Spindle
1 × $617.00 -
×
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
200 × $1.92 -
×
3M 20903, PSA Cloth Disc 348D, P240 X-weight, 2 in x NH, Die 200P, 7000118877
200 × $0.82 -
×
3M 05576, Stikit Disc Pad, Blue, 6 in x 3/4 in, 5/16-24 External, 7000045680
10 × $52.81 -
×
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
5 × $509.65 -
×
3M 62715, Scotch-Weld Stainless Steel High Temperature Pipe Sealant PS67, White, 250 mL Tube, 7100039215, 2/case
2 × $75.72 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Standard Abrasives 78525, Ceramic Pro Type 29 Flap Disc, 645134, 4-1/2 in x 7/8 60 Y-weight, 7010331465
10 × $7.50 -
×
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
200 × $1.43 -
×
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series with Brake, 25,000RPM, 33425
1 × $975.00
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
Standard Abrasives 713218, A/O Straight Cartridge Roll, 5/8 in x 1-1/2 in x 1/8 in 60, 7100102807
50 × $0.79 -
×
3M 30688, Cloth Belt 577F, 120 YF-weight, 3/4 in x 18 in, Fabri-lok, Single-flex, 7000119460, 200 per case
200 × $1.61 -
×
3M 02593, Stikit Gold Sheet Roll, P240, 2-3/4 in x 45 yd, 7000028244
10 × $62.51 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
