-
×
3M 08024, Adhesive Sealant 740 UV, Black, 290 mL Cartridge, 7100115542, 12 per case
12 × $16.25 -
×
Standard Abrasives 701149, PSA A/O Disc, 1 in x NH, 240, 7010370103
100 × $0.21 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 08302, Ultrapro Autobody Sealant, Clear, 5 oz Tube, 7000120449, 6 per case
6 × $30.54 -
×
3M 86512, Scotch Box Sealing Tape Hand Dispenser H192, 2 in, 6/Case, 7000131136
6 × $62.92 -
×
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
200 × $1.43 -
×
Standard Abrasives 725007, Buff and Blend Cross Buff HS, A/O Medium, 1 in x 3/8 in x 2 Ply x 8-32, 7000046828
50 × $3.13 -
×
3M 57173, Temflex Cotton Friction Tape 1755, 3/4 in x 60 ft, Black, 7000058870
20 × $7.66 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
