-
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $266.68 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
600 × $1.54 -
×
Norton 66261009191 - 2" Blank Coarse Grade Rapid Prep Non-Woven Surface Preparation Disc, 25 Each
25 × $1.60 -
×
Dynabrade 96074 Motor Tune-Up Kit
1 × $178.38 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.63 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
400 × $1.64 -
×
Norton 66252843323 - 4 -1/2" X 1/8" X 5/8" Center Hub, NORZON PLUS Type 27 Depressed Center Cut Off And Grinding Wheel, 10 Each
10 × $10.68 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
12 × $7.60 -
×
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
2 × $40.00 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.46
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.66 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 62605, Scotch-Weld Threadlocker TL42, Blue, 10 mL Bottle, 7100039190, 10/case
10 × $14.12 -
×
3M 26309, Cloth Belt 341D, P180 X-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118794, 50 per case
50 × $4.47 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.66 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $1.05
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
