-
×
3M 99126, Splittable Flying Splice Tape R3389B, Blue, 75 mm x 55 m, 7.3 mil,12 rolls per case, 7100049353
12 × $257.60 -
×
Dynabrade 55204 Vane Set (4pk)
1 × $39.08 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
3M 92040, Repulpable Splittable Flying Splice Tape R3375, Blue, 60 mm x 55 m,7.2 mil, 16 rolls per case, 7100042091
32 × $187.26
-
×
3M 17596, Repulpable Strong Single Coated Tape R3187, White, 24 mm x 55 m, 7.5mil, 36 rolls per case, 7100028048
36 × $15.72
-
×
3M 26129, PPS Series 2.0 Adapter, Type S34, 3/8 Female, 18 Thread NPS, 7100135938
4 × $38.43 -
×
3M 55701, Stikit Film Disc w/Tab 375L, P180, 6 in x NH, Die 600Z, 7100106619, 250 per case
250 × $0.70 -
×
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
1 × $512.00 -
×
3M 99633, Scotch-Weld Pressure Fit/High Temperature Retaining Compound RT48, Green, 250 mL Bottle, 7100170130, 2/case
2 × $133.06 -
×
Dynabrade 51350 2-3/4" W x 11" L File Board Sander, Non-Vacuum
1 × $873.80 -
×
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
12 × $9.49
Standard Abrasives 522317, Quick Change Silicon Carbide 2 Ply Disc, 60, TSM, Black, 1-1/2 in, Die QS150SM, 7010368219, 50/case
$0.50
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
