-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
Standard Abrasives 840113, Quick Change Buff and Blend GP Disc, A/O Fine, TSM, Maroon, 1 in, Die QS100NM, 7000046848, 50/case
50 × $1.05 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.57 -
×
Dynabrade 58509 3" W x 4-1/4" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
2 × $40.00 -
×
3M 01708, Scotch-Brite SST Deburring Wheel, ST-WL, 8S Fine, 8 in x 2 in x 3 in, 7000144590
2 × $267.05 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
Norton 66261126299 - 2" X 50 Yard 80 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
3 × $59.33 -
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $41.26 -
×
3M 19773, Utility Cloth Sheet 314D, 9 in x 11 in P60 X-weight, 7000000360
50 × $1.99 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $1.05 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 76630, Roloc Disc 777F, 50 YF-weight, TR, 2 in, Die R200P, 7000045627
200 × $1.30 -
×
Dynabrade 78295 3" Dia. x 6A M Medium Type R Unitized Locking-Type Disc, 25/pack
25 × $14.88 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55
Standard Abrasives 522218, Quick Change Silicon Carbide 2 Ply Disc, 80, TSM, Black, 1 in, Die QS100NM, 7010368187, 50/inner, 200/case
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
