-
×
3M 26127, PPS Series 2.0 Adapter, Type S31, 1/8 Male, 28 Thread BSP, 7100135953
4 × $27.52 -
×
3M 07053, General Purpose Sanding Sponge CP040-12-CC, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100101245
12 × $3.40 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,520.00 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.74 -
×
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
4 × $27.52 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $2,022.00 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.50 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
5 × $90.19 -
×
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
1 × $52.38 -
×
Dynabrade 57810 3-2/3" W x 7" L Dynabug Orbital Sander, Non-Vacuum, .28 HP, 10,000 RPM, 3/32" Orbit
1 × $490.00 -
×
Standard Abrasives 724277, Buff and Blend Circle Buff GP, A/O Very Fine, 2 in x 2 Ply x 8-32, 7010368699
25 × $7.30 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
2 × $2,712.00 -
×
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
2 × $55.07 -
×
3M 13373, Scotch-Brite Star, 4 in A CRS LS, 7000120968
50 × $11.40 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $10.47 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Standard Abrasives 725013, Buff and Blend Cross Buff HP, A/O VFN, 1-1/2 in x 1/2 in x 2 Ply x 8-32, 7000046831
50 × $5.20 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 05783, Hookit Pad D/F, 8 in x 5 bolt hole, 7000119884
1 × $84.67 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
Norton 66261127733 - 2" X 50 Yard 60 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $69.86 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $36.81 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
50 × $16.15 -
×
3M 09555, Scotch-Brite EXL Deburring Wheel, XL-WL, 8S Fine, 12 in x 2 in x 5 in, 7000148257
1 × $318.51 -
×
3M 05009, Utility Cloth Roll 211K, 100 J-weight, 1 in x 50 yd, Full-flex, 7100016843
5 × $64.59 -
×
Standard Abrasives 265006, Buff and Blend Cross Buff HS, A/O Medium, 3/4 in x 3/8 in x 2 Ply x 8-32, 7010330373
10 × $1.71 -
×
Dynabrade 58515 2-3/4" W x 7-3/4" L Dynabug II Orbital Sander, Central Vacuum, .11 hp, 8,000 RPM, 3/16" Orbit
1 × $281.00 -
×
Dynabrade 92210 1/8" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.02 -
×
Standard Abrasives 725008, Buff and Blend Cross Buff HP, A/O Very Fine, 1 in x 3/8 in x 2 Ply x 8-32, 7000046829
50 × $3.44 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91
Standard Abrasives 522218, Quick Change Silicon Carbide 2 Ply Disc, 80, TSM, Black, 1 in, Die QS100NM, 7010368187, 50/inner, 200/case
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
