The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. The 3M Roloc attachment system gives you quick and easy disc change-out, making the SE Roloc disc ideal for heavy duty deburring and finishing.
SE surface conditioning discs use aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our 3M Roloc TR, TS, and TSM quick change discs are smaller discs that easily and quickly attach onto a Roloc disc pad (sold separately) so that you can conveniently change discs from job to job or in multi-step finishing processes. Our 3M Roloc Quick Change Attachment System provides a secure attachment even for heavy-duty applications, and the variety of available Roloc discs allows swapping from one application to the next in seconds. Each disc is also color-coded to identify its grade, making it easy to grab the grade required for different applications.
We developed Scotch-Brite surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc.

Dynabrade 57457 - 2-3/4" (70 mm) W x 8" (203 mm) L Vacuum Dynaline Disc Pad, Hook-Face, Short Nap
Dynabrade 56826 6" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/16" Orbit
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
Dynabrade 15336 Rubber Drive Wheel
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
Dynabrade 93342 Carbide Burr, 1/8" Dia., SD-42 D/C Burr, Ball Radiused End, 1/8" Flute L, 1/8" Shank
Dynabrade 94300 1/4" NPT Composite Dynaswivel
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
Dynabrade 90040 5" Dia. Foam, Flat Face Polishing Pad
Dynabrade 80057 Motor Brush Set, 110/120V-60 Hz
Dynabrade 77770 5" Dia. x 7/8" Center Holes, 120 Grit, Z/A, Type 27, DynaCut Flap Disc w/Fiberglass, 10/pack
Dynabrade 52836 1/4" Drill, .4 HP, Rear Exhaust, 20,000 RPM
Dynabrade 45201 Sleeve for 48325, 25,000 RPM
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 91748 DynaMesh 11" 80 Grit Hook & Loop Discs, 25 per box
Dynabrade 52474 Vane Set (4pk)
Dynabrade 58358 Cylinder
Dynabrade 11231 Contact Arm Ass'y, 3/4" Dia. x 1/2" W, Rubber Wheel, with 1/2" W Platen
Dynabrade 92153 1/2" W x 12" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 90272 3-1/2" W x 15-1/2" L 60 Grit A/Z DynaCut Belt, 10/ Pack 
