-
×
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
1 × $140.64 -
×
Dynabrade 54972 Vane Set (5pk)
3 × $48.62 -
×
Dynabrade 01480 Vane Set (4pk)
2 × $26.09 -
×
Norton 66253370793 - 4 1/2" X 1/4" X 5/8"-11 Centert Hub, Quantum3 Ceramic Type 27 Depressed Center Grinding Wheel, 10 Each
10 × $11.99 -
×
3M 27472, Stikit Gold Paper Disc Roll 216U, P220 A-weight, 6 in x NH, Die 600Z, 7000119184, 175 discs per roll
6 × $180.63 -
×
Dynabrade 18426 Vane Set (4pk)
2 × $20.20 -
×
3M 41995, Stikit Gold Disc Roll, 6 in, P100A, 7010361693, 125 discs per roll
10 × $90.97 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
2 × $1,245.00 -
×
3M 86836, Cubitron II Stikit Paper Disc Roll 732U, 80+ C-weight, 6 in x NH, Die 600Z, 7100045905, 100 discs per roll
4 × $110.43 -
×
Dynabrade 11518 Rubber Drive Wheel
3 × $123.26 -
×
Dynabrade 52474 Vane Set (4pk)
1 × $34.27 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 92120 1/4" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 54705 Rotor/Vane Set
1 × $118.01 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 01185 Vane Set (4pk)
1 × $26.54
-
×
Dynabrade 55204 Vane Set (4pk)
2 × $39.08
-
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 25234 Vane Set (4pk)
1 × $28.26
-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 27611, Trizact Finesse-it Film Disc Roll 464LA, A5, 1-1/4 in x NH, Die 125C, 7000148157, 500 discs per roll
4 × $405.07 -
×
3M 27471, Stikit Gold Paper Disc Roll 216U, P240 A-weight, 6 in x NH, Die 600Z, 7000119183, 175 discs per roll
6 × $196.38 -
×
3M 01202, Stikit Gold Disc Roll, 6 in, P500, 7000119699, 75 discs per roll
6 × $51.41 -
×
Dynabrade 11004 Dynafile Screw-In Housing
1 × $275.11 -
×
Dynabrade 11395 Guide Wheel
1 × $39.90
3M 13178, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 2 in x 1 in, 7000028446
$92.23
Factory Stock, 7-10 Day Leadtime
Scotch-Brite Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
Our Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.
Our Scotch-Brite™ Multi-Finishing Wheel uses silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Related products
