-
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
2 × $1,493.91 -
×
3M 03993, Scotch-Brite Light Deburring Wheel, LD-WL, 6S Fine, 6 in x 1/2 in x 1 in, 7000120904
4 × $60.84 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $531.79 -
×
3M 45188, Stikit Disc Hand Pad, 5 in x 1/8 in, 7100015524
20 × $7.52 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3 × $1,509.65 -
×
3M 17596, Repulpable Strong Single Coated Tape R3187, White, 24 mm x 55 m, 7.5mil, 36 rolls per case, 7100028048
36 × $15.72 -
×
3M 99126, Splittable Flying Splice Tape R3389B, Blue, 75 mm x 55 m, 7.3 mil,12 rolls per case, 7100049353
12 × $257.60
-
×
3M 17666, Repulpable Heavy Duty Double Coated Tape R3287, White, 48 mm x 165,m, 5 mil, 6 rolls per case, Plastic Pallet, 7100028173
6 × $190.52
-
×
3M 17524, Repulpable Double Coated Flying Splice Tape 913, Blue, 24 mm x 33 m,3 mil, 36 Roll/Case, 7100027393
36 × $12.12
-
×
3M 20160, Scotch-Weld Epoxy Adhesive 1838, Green, Part A, 5 Gallon Drum (Pail), 7010309728
5 × $422.42 -
×
3M 31665, Double Coated Tape 9741, Clear, 36 mm x 55 m, 6.5 mil, 32 rolls per case, 7000124337
32 × $24.20
-
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $24.56 -
×
3M 00321, Repulpable Double Coated Tape R3227B, Blue, 18 mm x 55 m, 0.09 mm, 48 Roll/Case, 7100279679
48 × $18.18
-
×
3M 39603, Removable Repositionable Tape 9415PC, Clear, 48 in x 72 yd, 2 mil, 1Roll/Case, 7000001226
1 × $2,806.48
-
×
3M 65873, Double Coated Tape 9579, White, 1/2 in x 36 yd, 9 mil, 72 rolls per case, 7000123508
72 × $7.00
-
×
3M 92116, Safety-Walk Slip Resistant Reflective Tread, 600BY-T6X24, 6 in x 2 ft, Black, 7100155071
24 × $6.99 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Dynabrade 96680 Tune-Up Kit for .7 hp Motor
1 × $174.69 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 92607, Repulpable Splittable Flying Splice Tape R5348, Blue, 50 mm x 50 m,5 mil, 24 rolls per case, 7010374689
24 × $112.43
-
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 31467, Double Coated Tape 9737R, Red, 36 mm x 55 m, 3.5 mil, 32 rolls per case, 7000049264
32 × $15.71
-
×
Dynabrade 55500 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 1/8" Collet
1 × $530.40 -
×
ACS-CP Curved Edge Flap Disc, 4-1/2" Dia. X 5/8"-11 Center Thread, 60 Grit
1 × $10.50 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
15 × $0.00 -
×
3M 95620, Venture Tape Metal Building Facing Tape 1531CW, White, 6 in x 50 yd, 7010313495
8 × $59.28 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,598.86 -
×
3M 87261, Scotch-Weld Epoxy Adhesive DP100, Clear, 400 mL Duo-Pak, 7000121318, 6/case
6 × $146.93 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $104.07 -
×
3M 01686, Scotch-Brite Light Deburring Wheel, LD-WL, 8S Fine, 12 in x 1 in x 5 in, 7000120908
1 × $169.57 -
×
3M 49937, Roloc Disc 361F, 60 YF-weight, TSM, 2 in, Die RS200PM, 7000119016
200 × $1.01 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
ACS 1/2 in x 18 in Diamond Metal Bond Belt, 60M/250u
1 × $30.00
3M 71361, 641WY 1/4″ X 24″, 1200 Mesh Diamond Cloth Belt, 7010534916
$9.52
- Diamond mineral encapsulated in a ceramic bead provides consistent finishes on tough metals and ceramics
- Heavy duty, cloth backing is waterproof for use with coolant
- Diamond mineral for hard-to-finish materials like stone, glass, ceramic, carbide and composites
- X-weight cloth backing
- Available in grades 100mesh through 1800mesh
3M™ Diamond Cloth Belt 641WY is engineered with micron-graded diamond, a long-lasting resin bond and a durable, water-resistant X-weight cloth backing, making it ideal for grinding and polishing ceramics, carbide, cast iron and other hard-to-grind materials.
Faster Cut, Finer Finish
Uniquely engineered to tackle the toughest jobs, 3M™ Diamond Cloth Belt 641WY is constructed with micron-graded diamond particles encapsulated in a ceramic bead. As the ceramic erodes, diamond particles continue to be exposed.
Diamond is extremely useful in grinding and polishing hard materials for its unique ability to produce excellent surface finishes combined with high removal rates.
This belt is engineered with a tough resin bond. This bond is durable and excellent for hard-to-grind materials. This product material can be used with oil and water based lubricants.
Use Wet or Dry
A water-resistant X-weight cloth backing means it can be used wet as well as dry. Coolant is useful to clear grinding swarf and prevent debris from scratching the surface of a workpiece. It also keeps grinding temperatures cooler.
Tough Abrasive for Hard-to-Grind Materials
This belt’s overall toughness makes it ideal for polishing and finishing ceramics, chilled cast iron, thermal spray coatings, HVOF coatings and the many extremely hard composites being used more in industries.
Related products
