-
×
Standard Abrasives 726070, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 60, 7100098797
25 × $5.24 -
×
Standard Abrasives 701913, A/O Straight Cartridge Roll, 3/8 in x 1 in x 1/8 in 100, 7100102977
100 × $0.40 -
×
Standard Abrasives 730102, Ceramic Full Taper Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 120, 7100102951
100 × $1.65 -
×
3M 80797, Cartridge RoII 747D, 3/4 in x 1-1/2 in x 1/8 in, 80 X-weight, 7010327451
100 × $1.92 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
2 × $2,712.00 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
Dynabrade 91165 1/2" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.95 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 75U
2 × $57.10
3M 71346, 675L, 1″ X 120″, 125u, Diamond Microfinishing Film Belts, 7010534823
$103.76
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products