-
×
3M 26125, PPS Series 2.0 Adapter, Type S29, 8 mm Male, 1.25 mm Thread, 7100135955
1 × $25.96 -
×
3M 06580, Marine Adhesive Sealant 4000 UV, White, 295 mL Cartridge, 7000046623, 12/Case
12 × $24.95 -
×
3M 34118, 663FC, 2" X 120", 70u, Diamond Trizact Belt 7010509077
1 × $1,278.04 -
×
Standard Abrasives 701217, Aluminum Oxide Spiral Band, 60, 1 in x 1 in, 7100138185
300 × $0.73 -
×
3M 34554, Cubitron II Net Sheet Roll, 220+, 80 mm x 10 m, 7100247496, 6 Rolls/Case
6 × $31.57 -
×
Standard Abrasives 707115, Spiral Band, 1 in x 1 in 50, 7010331384
100 × $0.74 -
×
3M 04240, Semi-Rigid Plastic Repair, 04240, 200 mL Cartridge, 7000046371
6 × $63.58 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
ACS Diamond Cloth Belt, CX1250 1" X 49" 125U
6 × $29.95 -
×
Insize 7113-300A, RIGID RULE, 12"/300mm, 6928640319860
1 × $24.61 -
×
3M 40209, Cloth Spiral Band 341D, P100 X-weight, 1 in x 1 in, 7100138143
100 × $0.60 -
×
3M 16578, Accuspray ONE Spray Gun Kit, 7100096182
4 × $363.88 -
×
Dynabrade 92013 1" Dia. x 1" W, 60 Grit, Z/A DynaCut Band, 10/pack
10 × $1.52 -
×
Standard Abrasives 727086, Surface Conditioning Band, 1 in x 1 in CRS, 7100062984
10 × $4.78 -
×
3M 98242, Marine Adhesive Sealant 3000 UV, Black, 290 mL Cartridge, 7100111111, 12/Case
12 × $13.17 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
50 × $6.21 -
×
3M 40210, Cloth Spiral Band 341D, 80 X-weight 1 in x 1 in, 7100138142
100 × $0.62 -
×
3M 35519, Rubber Sanding Block, 2-3/4 in x 5 in, 7000126109
5 × $19.14 -
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.17 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $62.51 -
×
3M 15289, 663FC, 2-3/4" X 160", 40u, Diamond Trizact Belts 7010508900
2 × $2,343.05 -
×
3M 05742, Hookit Soft Hand Block, 2-3/4 x 5 in, 7000045436
20 × $44.97 -
×
3M 05740, Hookit Hand Block, 2-3/4 in x 5 in, 7000045715
10 × $31.28 -
×
3M 36882, Self-Stick Liquid Protection Fabric, Blue, 56 in x 300 ft, 7100169350
1 × $1,246.87 -
×
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
200 × $1.43 -
×
Dynabrade 78496 4" Dia. x 2", 1/4-20 Female Center Thread, A/O, 180 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
100 × $4.94 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
20 × $18.37 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 9U
2 × $171.30
-
×
3M 40178, Cloth Spiral Band 341D, 36 X-weight, 3 in x 3 in, 7100138157
50 × $2.15 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 20U
2 × $171.30
-
×
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
12 × $23.20
-
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70
-
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
6 × $40.60
-
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15
3M 35790, 675L, 1″ X 120″, 74u, Diamond Microfinishing Film Belts, 7010509196
$97.15
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products