-
×
Dynabrade 92013 1" Dia. x 1" W, 60 Grit, Z/A DynaCut Band, 10/pack
10 × $1.52 -
×
3M 01411, Roloc Brake Rotor Surface Conditioning Disc Refill Pack, P120 grit, 7000120356, 12 discs per pack
12 × $41.71 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
Dynabrade 90702 4" Dia. x 1" W, 36 Grit, Z/A DynaCut Band, 10/pack
10 × $3.96
-
×
3M 26585, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Clear, 1.8 mm, 7100152955
10 × $6.63 -
×
Dynabrade 91069 1" Dia. x 1" W, 80 Grit, Z/A DynaCut Band, 10/pack
10 × $1.10
-
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 20U
2 × $171.30 -
×
3M 33179, Scotch-Brite Radial Bristle Brush Replacement Disc, T-C 120 Refill, 7-5/8 in, 7100138304
1 × $720.49 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 05741, Hookit Hand Block, 2-3/4 in x 7-3/4 in, 7000045716
10 × $36.94 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $62.51 -
×
3M 33178, Scotch-Brite Radial Bristle Brush Replacement Disc, BB-ZB, 80, Type C, 7-5/8 in, Refill, w/o Adaptor, 7100138303
1 × $720.49 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60
3M 35790, 675L, 1″ X 120″, 74u, Diamond Microfinishing Film Belts, 7010509196
$97.15
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products
