-
×
3M 07466, Scotch-Brite Roloc+ Clean and Strip Disc 7466, 4 in x 1/2 in S XCS, 7000120779, 10/case
10 × $15.07 -
×
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
100 × $6.21 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
Standard Abrasives 727087, Surface Conditioning Band, 1 in x 1 in MED, 7100096389
10 × $4.78 -
×
3M 05444, Stikit Hand File Board, 2-3/4 in x 16 in, 7000045763
1 × $75.21 -
×
3M 64926, Scotch-Brite Hand Pad 7447 PRO, PO-HP, A/O Very Fine, 6 in x 9 in, 7100023339, 20/Carton
3 × $28.53 -
×
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
24 × $3.80 -
×
3M 04028, Scotch-Brite Hand Pad 7448, HP-HP, SiC Ultra Fine, Gray, 6 in x 9 in, 7100089226, 60/case
1 × $85.47 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 33178, Scotch-Brite Radial Bristle Brush Replacement Disc, BB-ZB, 80, Type C, 7-5/8 in, Refill, w/o Adaptor, 7100138303
1 × $720.49 -
×
3M 15289, 663FC, 2-3/4" X 160", 40u, Diamond Trizact Belts 7010508900
1 × $2,343.05 -
×
3M 30189, Trizact Hookit Foam Sheets, 5000, 2-3/4 in x 5-1/2 in (70 mm x 140 mm), 7000120137, 5 sheets per carton
10 × $19.46 -
×
3M 05442, Stikit Soft Hand Block, 2-3/4 x 5 in, 7000045435
10 × $28.89 -
×
3M 05441, Stikit Hand Block, 2-3/4 in x 7-3/4 in, 7000045765
10 × $34.55 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 20105, Scotch-Weld Epoxy Adhesive 1751, Gray, Part B/A, 1 Gallon Kit, 7000046339, 2/case
2 × $916.63 -
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
6 × $40.60
3M 35790, 675L, 1″ X 120″, 74u, Diamond Microfinishing Film Belts, 7010509196
$97.15
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products
