-
×
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
12 × $7.60 -
×
3M 82597, Hot Melt Adhesive 3764 AE, Clear, 0.45 in x 12 in, 7000000885, 11 LBS/Case
11 × $28.04 -
×
3M 55379, Flap Disc 566A, 60, T27 Quick Change, 4-1/2 in 5/8"-11, Giant, 7010327377, 10 per case
10 × $0.00 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.64 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $10.47 -
×
3M 21028, Floor Surfacing Discs, 12 Grit, 16 in x 2 in, 7010314898
25 × $9.88 -
×
3M 09292, Rubber Sanding Block, 7000126886
10 × $5.04 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
400 × $1.46
-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.74 -
×
3M 76630, Roloc Disc 777F, 50 YF-weight, TR, 2 in, Die R200P, 7000045627
200 × $1.30 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
6 × $30.90 -
×
3M 36518, Green Corps Abrasive File Belt, 80 Grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100226321, 20 Belts Per Carton, 5 Cartons Per Case
5 × $47.04 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $303.80 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.07 -
×
3M 17586, Repulpable Strong Single Coated Tape R3187, Blue, 96 mm x 55 m, 7.5mil, 8 rolls per case, 7100028025
8 × $66.64
-
×
3M 06564, Marine Adhesive Sealant 4200FC Fast Cure, Black, 295 mL Cartridge, 7000120497, 12/Case
12 × $27.89 -
×
Dynabrade 51150 5" Dia. Disc Backup Pad, Medium Density, 5/8"-11 Thread
1 × $32.82 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91
Standard Abrasives 546057, Quick Change TR Medium Disc Pad w/TA4, 2 in, 7000122299
$19.69
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Quick Change Disc Pads, also called Holder Pads, allow you to rapidly change Standard Abrasives quick change discs (sold separately) during multi-step projects. ?A wide range of sizes and densities are available, ensuring that you can find the pad(s) that best suits your specific grinding and finishing application.
Three Attachment Types: TS, TR, TP
Standard Abrasives™ Quick Change Disc Pads come with one of three quick change attachment styles. Attachment styles include TS, TR and TP. TS is a standard metal-to-metal attachment style, TR is a 3M™ Roloc™ style nylon threaded male hub, and TP is a snap-on/snap-off nylon fastening hub. Each of the attachment styles allows easy swap out of discs with a speedy quarter turn.
Choosing a Mandrel
Our Standard Abrasives™ Quick Change Disc Pads are available with or without mandrels. Some TS and TR holder pads come with an attached 1/4-inch diameter TA4 mandrel. Others come with an attached 6 mm diameter TA6 mandrel. TP disc holders come with the TA4 mandrel attachment only. Disc pads are also available without mandrels, so users can select a mandrel of their choice for their application. Holders without an attached mandrel feature a 1/4-20 female thread interface for mandrel attachment. Once the mandrel is attached, users typically fasten the disc pad/mandrel assembly to a rotary tool or die grinder.
Which Density is Best?
Different densities signal varying levels of flexibility of the disc pad. Soft density disc pads are most flexible, and are typically reserved for fine grade abrasive products used in finishing and contouring applications. Medium density disc pads are typically used for general purpose type work. Hard density disc pads are the most rigid, and are typically reserved for coarse grade abrasive products used in weld grinding and stock removal applications.
Altogether, Standard Abrasives™ Disc Pads allow for quick and easy disc attachment and removal, enhancing productivity and adding efficiency to your industrial applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
