-
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
40 × $12.65 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
400 × $0.97 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
12 × $7.60 -
×
3M 25125, Scotch-Weld Threadlocker TL71, Red, 1 mL Pipette, 7010330204, 100/case
100 × $1.85 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
Dynabrade 51706 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.17 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $16.22 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 30289, Trizact Hookit Finishing Foam Sheet, 5000, 2-3/4 in x 5-1/2 in, 7000120135, 15 Sheets/Carton
4 × $55.66 -
×
3M 26312, Cloth Belt 341D, P120 X-weight, 2 in x 72 in, Film-lok, Single-flex, 7010307961, 50 per case
50 × $4.07
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
