-
×
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
10 × $14.65 -
×
3M 16314, PPS Lid & Liner Kit, Mini (6 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045487
1 × $112.83 -
×
3M 50730, PPS UV Standard Lid & Liner Kit, Standard (22 fl oz, 650
mL), 125 Micron Filters, 7100067511
1 × $161.35 -
×
3M 34786, 663FC, 3/4" X 90", 70u, Diamond Trizact Belts 7100063667
1 × $300.00 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
40 × $12.65 -
×
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
1 × $1,025.00 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
1 × $77.50 -
×
3M DP16, Scotch-Brite Driving Pad, 16 in , White, 7000126477
5 × $10.14 -
×
3M 26620, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Red, 2.0 mm, 7100141414 (4 Nozzles/Kit)
6 × $31.20 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 08017, Marine Grade Silicone Sealant, White, 3 oz Tube, 7000120479, 6/Case
6 × $15.76 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 16612, Accuspray Atomizing Head, Orange, 1.4 mm, 7100017731 (4 Nozzles/Kit)
6 × $30.70 -
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $47.66 -
×
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
24 × $16.94 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
3M 20276, Neoprene Contact Adhesive 10, Light Yellow, 5 Gallon Pour Spout Drum (Pail), 7000121218
5 × $81.72 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
