-
×
3M 06221, Stikit Film Disc Roll 360L, P600, 5 in x NH, Die 500X, 7000144140, 125 discs per roll
4 × $60.19 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
2 × $80.58 -
×
3M 29835, Sanding Screen, 80 Grit, 18 in x NH, 7100160844
12 × $9.18 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
1 × $359.45 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
Dynabrade 51756 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $603.00 -
×
3M 05516, Polyurethane Glass Adhesive Sealant 590, Black, 310 mL Cartridge, 7100060280, 12/Case
12 × $18.44 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
Dynabrade 51862 .4 hp Trim Router (Complete), 30,000 RPM, 1/4 Collet
1 × $714.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
400 × $1.39
-
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 200u
12 × $8.20 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 66757, Combat Arms 4th Generation Probed Test Plugs, Small, 50 Pairs/Box, 393-2018S-50, 7010316609
42 × $305.84
-
×
Insize 7341-12S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .635-.704", 6928640360701
1 × $64.73
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
