-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
2 × $129.94 -
×
3M 01331, PSA Cloth Disc 348D, P100 X-weight, 3 in x NH, Die 300V, 7000118882
200 × $0.84 -
×
3M 16615, Accuspray Atomizing Head, Blue, 1.2 mm, 7100086837 (4 Nozzle/Kit)
6 × $30.46 -
×
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $603.00 -
×
Dynabrade 58442 6" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, Non-Vacuum, .45 HP, 900 RPM, PSA
1 × $583.00 -
×
3M 29353, Particulate Respirator 9502+N95, 7100240920, 500 ea/Case
1 × $444.12 -
×
3M 03601, Plastic Emblem and Trim Adhesive, 1 oz, 7100045880, 24 per case
24 × $3.65 -
×
3M 47181, Polyurethane Adhesive Sealant 550FC Fast Cure, Black, 600 mL Sausage Pack, 7100197989, 12/Case
12 × $16.09 -
×
3M 97957, Hi-Strength Spray Adhesive 90 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7000121418, 12/Case
12 × $21.93 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 20244, Neoprene Rubber and Gasket Adhesive 2141, Light Yellow, 1 Gallon Can, 7000121215, 4/case
4 × $184.40 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
