-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
3M 80766, Cloth Spiral Band 747D, 50 X-weight, 1 in x 1 in, 7100138164
100 × $1.04 -
×
3M 57774, Scotch Buried Barricade Tape 369, CAUTION HIGH VOLTAGE CABLE BURIED BELOW, 6 in x 1000 ft, Red, 7000133187
4 × $82.73 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series with Brake, 30,000RPM, 33434
1 × $975.00 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series with Brake, 30,000RPM, 33435
1 × $975.00
-
×
3M 37442, Scotch Duct Tape 910-CHV-C, 1.88 in x 10 yd (48 mm x 9,14 m), 7100183292
6 × $2.99 -
×
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
50 × $4.35 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
1 × $17.15 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
1 × $718.09 -
×
3M 82511, Steel Mesh Faceshield Screen W96MW 82511-00000, with Clear Eyeshield, Headgear Not Included 10 EA/Case, 7000127231
1 × $701.18
-
×
3M 16151, PTFE Glass Cloth Tape 5451, Brown, 3/4 in x 36 yd, 5.6 mil, 7000050135
12 × $145.68 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
