-
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
1 × $1,029.08 -
×
3M 16028, PPS Lid & Liner Kit, Micro (3 fl oz), 200 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045465
1 × $94.69 -
×
3M 26024, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850mL), 200 Micron Filter, 7100134650
1 × $158.45 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
12 × $7.60 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 250u
12 × $8.20
-
×
3M 06223, Stikit Film Disc Roll 360L, P1000, 5 in x NH, Die 500X, 7010308877, 125 discs per roll
4 × $60.19 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
20 × $5.83 -
×
Standard Abrasives 890194, S/C Unitized Wheel, 632, 12 in x 1/4 in x 1-1/4 in, 7010367081
10 × $105.90 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M 14559, Roloc Disc 361F, P150 XF-weight, TR, 2 in, Die R200P, 7000119021
200 × $0.97 -
×
3M 55570, Stikit Paper Disc Roll 236U, 6 in x NH 6 Hole, P80 C-weight, D/F, Die 600HZ, 7000119561, 100 discs per roll
4 × $75.09 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $751.00 -
×
3M 34550, Cubitron II Net Sheet Roll, 80+, 80 mm x 10 m, 7100283781, 6 Rolls/Case
6 × $28.94 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
12 × $7.60
-
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
24 × $168.76 -
×
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
200 × $1.78 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
3M 08019, Marine Grade Silicone Sealant, Clear, 3 oz Tube, 7000120480, 6/Case
6 × $15.76 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
