-
×
3M 72600, 663FC 1/2" X 30", 70u Diamond Trizact Belt, 7100206529
1 × $0.00 -
×
3M 29833, Sanding Screen, 120 Grit, 18 in x NH, 7100160843
12 × $6.55 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 30u
12 × $7.60 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
12 × $7.60
-
×
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
200 × $3.47 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $25.96 -
×
Dynabrade 51630 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
12 × $7.60
-
×
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
6 × $29.15 -
×
3M 53036, 663FC, 1/2" X 90", 20u, Diamond Trizact Belt 7100205970
1 × $0.00 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 16067, PPS Mix Ratio Insert - Generic, 3 oz, 7000119840, 10 Inserts Per Pack
5 × $4.89 -
×
Dynabrade 51753 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
2 × $603.00 -
×
Dynabrade 51623 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
12 × $16.85 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
3M 87266, Scotch-Weld Epoxy Adhesive DP100 Plus, Clear, 200 mL Duo-Pak, 7100069498, 12/case
12 × $99.40 -
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $251.59 -
×
3M 08026, Sealant 730 UV, Clear, 305 mL Cartridge, 7100003045, 12/Case
12 × $25.96 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
