-
×
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case
2 × $126.95 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Dynabrade 51633 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
2 × $634.00 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $751.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 26325, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850
mL), 125 Micron Filter, 7100134637
1 × $151.19 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
Standard Abrasives 863299, Quick Change TR S/C Unitized Wheel, 632, 2 in x 1/4 in, 7010330149
20 × $5.73 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 01331, PSA Cloth Disc 348D, P100 X-weight, 3 in x NH, Die 300V, 7000118882
200 × $0.84 -
×
3M 66619, Cloth Belt 341D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7010360692, 25 per case
25 × $5.52 -
×
3M 16091, PPS Mix Ratio Inserts, Large (28 fl oz), 7000028411
100 × $65.88 -
×
3M 20897, PSA Cloth Disc 348D, 80 X-weight, 4 in x NH, Die 400BB, 7010294664
200 × $1.15 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M 70995, Scotch-Weld Acrylic Adhesive DP8410NS, Green, 490 mL Duo-Pak, 7100024045,6/case
6 × $77.59 -
×
Dynabrade 55500 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 1/8" Collet
1 × $557.00 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
