-
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 78294 3" Dia. x 2A M Medium Type R Unitized Locking-Type Disc, 25/pack
25 × $12.89 -
×
Dynabrade 55500 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 1/8" Collet
1 × $557.00 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.64 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.64 -
×
3M 36880, Self-Stick Liquid Protection Fabric, Blue, 36 in x 300 ft, 7100169352
1 × $994.10 -
×
Dynabrade 51333 .7 hp Router, 4" Base, Central Vacuum, 20,000 RPM, 1/4 Collet
1 × $1,031.00 -
×
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
1 × $512.00 -
×
Dynabrade 51630 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
2 × $634.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $482.25 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $18.37 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
2 × $1,012.00 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
1000 × $0.74 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.38 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
500 × $4.55 -
×
3M 04297 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 2 in x 132 in, 7010365859
5 × $56.35
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$27.54
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
