-
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M 11418, Roloc Disc 361F, P240 XF-weight, TR, 3 in, Die R300V, 7000045106
200 × $1.25 -
×
Dynabrade 51706 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 28120, Hookit Clean Sanding Disc 900DZ, 5 in 60 J-weight, Die 500LG, 7010326613
250 × $1.51 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 26557, Cloth Belt 341D, P180 X-weight, 2 in x 48 in, Film-lok, Single-flex, 7010307963, 50 per case
50 × $3.15 -
×
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
1 × $512.00 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 03601, Plastic Emblem and Trim Adhesive, 1 oz, 7100045880, 24 per case
24 × $3.65 -
×
Dynabrade 51702 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $16.22 -
×
3M 62606, Scotch-Weld Threadlocker TL42, Blue, 50 mL Bottle, 7100039193, 10/case
10 × $42.72 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
