-
×
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
200 × $1.78 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
36 × $23.31 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
400 × $1.74 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 77231, Scotch-Brite Roloc Deburr and Finish PRO Unitized Wheel, DP-UR, 2S Fine, TR, 2 in x 1/4 in x NH, 7010365721
60 × $6.55 -
×
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M 55573, Stikit Paper Disc Roll 236U, 6 in x NH 6 Hole, P150 C-weight, D/F, Die 600FH, 7000119564, 100 discs per roll
4 × $71.88 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $751.00 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3 × $4.57 -
×
3M 30189, Trizact Hookit Foam Sheets, 5000, 2-3/4 in x 5-1/2 in (70 mm x 140 mm), 7000120137, 5 sheets per carton
10 × $19.46 -
×
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
2 × $558.00 -
×
3M 14002, Stikit Film Disc Roll 360L, P1000, 6 in x NH, Die 600Z, 7010308878, 125 discs per roll
4 × $69.67 -
×
3M 05777, Hookit Soft Interface Pad, 6 x 1/2 x 3/4 inch, 7000028239
10 × $20.46 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
2 × $33.40 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
12 × $7.60 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Dynabrade 51756 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 35,000 RPM, 1/8" Collet
1 × $603.00 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15 -
×
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
200 × $0.82 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $1,025.00 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 26580, Accuspray ONE Spray Gun System with PPS Series 2.0 Spray Cup System, 7100163226
2 × $348.22 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $751.00 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38
Standard Abrasives 541151, Quick Change TS P.A.R.T. #21 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121723
$25.05
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
