-
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 54947 Spring, Throttle Ball
1 × $4.28 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.43 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series with Brake, 30,000RPM, 33434
1 × $975.00 -
×
Air Turbine Tools 310RDM - 6mm Router Hand Tool Series, 25,000RPM, 33423
1 × $950.00 -
×
Dynabrade 10040 Raptor Vac Pack Mobile Auto Vacuum System, 20 Gal. 120 V
1 × $3,643.69 -
×
Dynabrade 51857 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
2 × $742.58 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series with Brake, 40,000RPM, 33444
1 × $975.00
-
×
Air Turbine Tools 310RDM - 1/4" Router Hand Tool Series, 30,000RPM, 33432
1 × $950.00
-
×
Air Turbine Tools 310RSV - 6mm Router Hand Tool Series, 30,000RPM, 33431
1 × $950.00
-
×
Dynabrade 79174 2" W x 30" L 80 Grit Ceramic DynaCut Belt, 10/pack
10 × $15.91 -
×
Dynabrade 79152 1" W x 24" L 80 Grit DynaCut Premium Ceramic Belt, 50/pack
50 × $6.50 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series, 25,000RPM, 33420
2 × $950.00
-
×
Dynabrade 51703 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $531.79 -
×
Dynabrade 94112 7" Dynacut Diamond Segmented Rim Cut-Off Blade
1 × $112.48 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 06586, Marine, Adhesive, Sealant, 4000, UV, White, 400, mL, milliliter, Sausage, Pack, 7000121532, 12/ case
12 × $16.96 -
×
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
1 × $488.06 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $976.11 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
3M 36850, Dirt Trap Protection Material, White, 6 in x 300 ft, 7100132342
4 × $127.03 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67
Standard Abrasives 541150, Quick Change TS P.A.R.T. #10 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121722
$25.18
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
