-
×
Norton 66261096557 - 3" X 1/2" Blaze Rapid Strip Ceramic Alumina Extra Coarse Grade Non- Woven Abrasive Disc With Quick Change TR III Attachment, 25 Each
75 × $9.44 -
×
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
2 × $83.88 -
×
Insize 7232, SCRIBER, 6928640320088
1 × $7.01
-
×
3M 35833, Hookit Dust Extraction Flexible Radius Sanding Block Kit, 7100259118
10 × $153.37 -
×
Dynabrade 51860 1.0 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
1 × $866.78 -
×
Dynabrade 11253 Contact Arm Assy
1 × $525.64 -
×
Dynabrade 51857 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
1 × $742.58 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 19768, Utility Cloth Sheet 314D, 9 in x 11 in P180 J-weight, 7000000356
250 × $1.37 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 10455, Cloth Sheet 481W, 220, 9 in x 11 in, 7010294811
25 × $4.01 -
×
Dynabrade 92207 1/8" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.77 -
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
Dynabrade 79174 2" W x 30" L 80 Grit Ceramic DynaCut Belt, 10/pack
10 × $15.91 -
×
3M 05444, Stikit Hand File Board, 2-3/4 in x 16 in, 7000045763
1 × $75.21 -
×
Dynabrade 54430 4" Dia. Extended Right Angle Disc Sander, Steel Housing, Rear Exhaust, .7 HP, 12,000 RPM, 3/8"-24 Thread
1 × $1,134.42 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
5 × $82.04 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22
-
×
3M 85318, Cloth Belt 777F, 80 YF-weight, 1/4 in x 18 in, Fabri-lok, Single-flex, 7000118394, 200 per case
200 × $2.06 -
×
Norton 66261126299 - 2" X 50 Yard 80 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $61.49 -
×
3M 27455, GoggleGear 500 Series GG501SGAF, Clear Scotchgard Anti-fog lens 10 EA/Case, 7100079187
1 × $169.26
-
×
3M 45013, Diamond Grade DG3 Reflective Digital Sheeting 4090UDS, White, 36 in x 50 yd, 1 Roll/Case, 7100282747
1 × $2,355.37
-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
Standard Abrasives 541150, Quick Change TS P.A.R.T. #10 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121722
$25.18
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
