-
×
Dynabrade 92119 1/4" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $1.07 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
36 × $39.89 -
×
3M 19795, Utility Cloth Roll 314D, P400 J-weight, 1-1/2 in x 20 yd, 7100081717
5 × $43.31 -
×
Standard Abrasives 717213, A/O Full Taper Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 120, 7100080032
100 × $0.77 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $25.96 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
500 × $1.43 -
×
3M 22399, Roloc Disc 361F, 50 YF-weight, TR, 2 in, Die R200P, 7000028184
200 × $1.11 -
×
Insize 4120-10, METRIC THREAD RING GAGE, GO, M10x1.5, 6928640341458
1 × $64.03 -
×
Insize 7231, SCRIBER, 6928640320071
1 × $6.59
-
×
3M 26104, PPS Series 2.0 Adapter, Type S20, 1/8 Male, 27 Thread NPSM, 7100135929
1 × $25.96 -
×
3M 63738, Contractor Grade Multi-Use Duct Tape 2979, Silver, 1.88 in x 60 yd, 7010335692
24 × $8.33 -
×
3M 06536, Scotch Steel Gray Masking Paper, 06536, 36 in x 1000 ft, 1 per case, 7000045443
1 × $264.36 -
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $33.94 -
×
Insize 1185-200AWL, DIGITAL OUTSIDE POINT CALIPER, 0-8"/0-200mm, built-in wireless, 6940561959901
1 × $452.30
-
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22
-
×
Dynabrade 55034 3/8"-24 Female 5/8"-11 Male, 1-3/8" Length
1 × $50.25 -
×
Insize 0010-A35, SOUND LEVEL METER, 35dB~130dB, 6974029777004
1 × $170.80
-
×
Insize 0130-L110, LIGHT METER (BASIC TYPE), 6974029776564
1 × $65.70
-
×
Dynabrade 52402 2" (51 mm) Dia. 7 Degree Offset Disc Sander, Front Exhaust, .5 HP, 20,000 RPM, 1/4"-20 Thread
1 × $521.29 -
×
3M 08029, Marine Grade Silicone Sealant, Clear, 304 mL Cartridge, 7000120477, 12/Case
12 × $33.72 -
×
3M 45033, High Intensity Prismatic Reflective Digital Sheeting 3930UDS, White, 24 in x 50 yd, 1 Roll/Case, 7100282394
1 × $641.74
-
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $37.54 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14
Standard Abrasives 541150, Quick Change TS P.A.R.T. #10 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121722
$25.18
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Quick Change P.A.R.T. Disc Mandrel secures the Standard Abrasives Quick Change P.A.R.T. Disc to a rotary tool with a 5/8-inch collet assembly. These P.A.R.T. (Paint Anodized Removal Tool) Discs are used to clean and prep painted or corroded surfaces around holes prior to re-riveting or connecting a ground wire.
About the Quick Change P.A.R.T. Disc
The Standard Abrasives Quick Change P.A.R.T. Disc Mandrel is designed specifically for use with our Standard Abrasives Quick Change P.A.R.T. Discs. These discs are used to remove surface contaminants, paint or primer at electrical grounding contact points. The disc’s center hole diameter self-aligns so it will only clean the workpiece hole and maintain the anodized layer surrounding it. Plus, they’re available in a range of grades and sizes for your specific application.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
